Your not going to get a set that last a lifetime buddy.
It all depends how often you plan to use them.
If your using daily you will need to spend a bit more, especially with the HSS metal bits. Same goes with if your drilling anything harder than mild steel.
Ill asume your buying just to have incase you need them and using ocasionaly and in that case you can spend a lot less.
As a set, this dewalt one at screwfix is not bad and will last a while for general DIY. Link
If drilling metal apply a spot of cutting lubricant or even motor oil.
Add on the flat bits below for larger sized holes
If your buying seperate sets id go for these cobalt metal drills link
Id use them for metal and wood. Same applies with a spot of cutting compound when drilling metals.
Now thats just a budget recommendation for general DIY although would also be suitable for light trade use.
If your going to be tapping any holes you will need to get drills in tapping sizes as well.
Ive not looked for best prices on any of those items
Hope this helps.
All comments (34)
hoylake41
21 Jan 17#1
You can never have too many drill bits!
morrig to hoylake41
22 Jan 17#19
You can if there all rubbish,a bad tool can ruin a job as any "Pro" will tell you.
Them ones that are on the Ideal World channel seem like magic not cheap though,that can have the tip put against a electric grinder then drill through steel etc with ease.
sradmad
21 Jan 171#2
Great find vassy, STOCK near me, heat added :smiley:
vassy4u to sradmad
21 Jan 171#11
Thanks pal :smiley:
SENNYO1
21 Jan 171#3
These are cheap and nasty Chinese rubbish, bits bend and break trust me I bought and threw in bin very poor indeed :disappointed:
guttediam to SENNYO1
21 Jan 171#4
Thanx for info SENNY01, still adding Heat for deal
pawcioo83
21 Jan 171#5
Great find!!
vassy4u to pawcioo83
22 Jan 17#12
Thanks :smiley:
justanothercid
21 Jan 171#6
does me to start out and replace as my needs grow surely must put a whole in wood? thanks
hoylake41 to justanothercid
21 Jan 171#7
A whole what?
siadwel
21 Jan 172#8
But they put the price up from £7.49 to £14.99 so they can claim the huge price drop.
Opening post
50 drill pieces
- 32 piece HSS drill bits - 5x1mm; 5x1.5mm; 5x2mm; 4x 2.5mm; 3x3mm; 2x3.2mm; 4mm; 4.5mm; 5mm; 5.5mm; 6mm; 6.5mm; 7mm; 8mm.
- 5 piece masonry drills bits - 3mm; 4mm; 5mm; 6mm; 7mm.
- 4 piece flat wood drills bits - 10mm; 13mm; 16mm; 19mm.
- 9 piece wood drill.
Top comments
It all depends how often you plan to use them.
If your using daily you will need to spend a bit more, especially with the HSS metal bits. Same goes with if your drilling anything harder than mild steel.
Ill asume your buying just to have incase you need them and using ocasionaly and in that case you can spend a lot less.
As a set, this dewalt one at screwfix is not bad and will last a while for general DIY.
Link
If drilling metal apply a spot of cutting lubricant or even motor oil.
Add on the flat bits below for larger sized holes
If your buying seperate sets id go for these cobalt metal drills link
Id use them for metal and wood. Same applies with a spot of cutting compound when drilling metals.
Masonary id go for these link
Flat drills for larger sizes in wood and plastics link
Cutting lubricant when drilling metals.link
Now thats just a budget recommendation for general DIY although would also be suitable for light trade use.
If your going to be tapping any holes you will need to get drills in tapping sizes as well.
Ive not looked for best prices on any of those items
Hope this helps.
All comments (34)
Them ones that are on the Ideal World channel seem like magic not cheap though,that can have the tip put against a electric grinder then drill through steel etc with ease.
For that reason alone it's cold from me.