Product Description
Patriot Memory's Signature Line DDR3 Non-ECC Unbuffered SODIMM delivers the quality, reliability and performance expected for today's computer needs. These 8GB modules are designed to run at PC3-10600 (1333MHz) at CAS 9 latency timings. Built using specific build-of-materials (BOMs) we ensure that every module meets and exceeds industry standards: offering you a hassle free upgrade. We certify every component that goes into our modules, including the modules themselves, which must pass strict standards to ensure compatibility, quality and reliability. With free customer service and a lifetime warranty, Patriot Memory's Signature memory modules are a perfect system upgrade option.
Features
•1.5V Power Requirement
•Auto and self refresh capability
•PCB height: 1181(mil)
•Serial Presence-Detect (SPD)
•100% Tested
•RoHS Compliant
•JEDEC Compliant
Good bit of cheap laptop RAM :smiley:
All comments (17)
travyalonso
11 Dec 16#1
Could this be used for a PC?
Gkains to travyalonso
11 Dec 162#3
SoDIMM is for Laptops.
The only desktop PCs which might use it are very tiny miniPCs or some All-in-Ones.
krisward7955 to travyalonso
11 Dec 16#15
You can get an adaptor but I don't know if it would be worth it in the end
eBay number 322031622924
neoboy
11 Dec 161#2
Not unless you have a thin M-ITX motherboard so the general answer is no.
treeofthefiddy
11 Dec 16#4
Wish this was for desktops. Price has shot up for DDR3 recently.
Savo
11 Dec 16#5
Would this be OK for my HP 2540p laptop?
Crucial checker recommends CT5305193
DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V •
Thanks :smirk:
EDIT.. Laptop can only take a maximum of 8GB, it it ok in one stick? Sorry for my lack of knowledge :-)
Gkains
11 Dec 162#6
Just noticed that these are 1.5V so there are plenty of laptop which won't take them.
Generally, most Haswell or later ones might not as the Intel spec for those were DDR3L at 1.35V max. I know, for example, that a HP EliteBook 840 G1 will not get past POST with 1.5V memory.
I've had good experiences with Patriot RAM, haven't had a stick from them fail on me yet.
bertbert
11 Dec 16#9
I would say don't waste your money. Your laptop has a hard limit of 8GB based on its architecture. All laptops like this I've ever encountered have a limit per slot of 4GB (not to say there aren't exceptions but I have never found any). There's a slight performance boost with having two memory modules compared to one, but that's probably an aside since it isn't much.
Opening post
Patriot Memory's Signature Line DDR3 Non-ECC Unbuffered SODIMM delivers the quality, reliability and performance expected for today's computer needs. These 8GB modules are designed to run at PC3-10600 (1333MHz) at CAS 9 latency timings. Built using specific build-of-materials (BOMs) we ensure that every module meets and exceeds industry standards: offering you a hassle free upgrade. We certify every component that goes into our modules, including the modules themselves, which must pass strict standards to ensure compatibility, quality and reliability. With free customer service and a lifetime warranty, Patriot Memory's Signature memory modules are a perfect system upgrade option.
Features
•1.5V Power Requirement
•Auto and self refresh capability
•PCB height: 1181(mil)
•Serial Presence-Detect (SPD)
•100% Tested
•RoHS Compliant
•JEDEC Compliant
Good bit of cheap laptop RAM :smiley:
All comments (17)
The only desktop PCs which might use it are very tiny miniPCs or some All-in-Ones.
eBay number 322031622924
Crucial checker recommends CT5305193
DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V •
Thanks :smirk:
EDIT.. Laptop can only take a maximum of 8GB, it it ok in one stick? Sorry for my lack of knowledge :-)
Generally, most Haswell or later ones might not as the Intel spec for those were DDR3L at 1.35V max. I know, for example, that a HP EliteBook 840 G1 will not get past POST with 1.5V memory.
http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/DRAM-Upgrade-for-Elitebook-2540P/td-p/4848757
Says the 2540p is 1.5V only so should be okay?
If Crucial are recommending that, then according to that forum post theirs should 1.5V/1.35V dual compatible.