Clearance ONLINE only. Not stocked in store. Free Click and collect available.
30W LED floodlights are usually much more expensive (£30ish).
30W With PIR Product code: 5052931515837 £19 (reduced from £38)
30W Without PIR Product Code 5052931515820 £14
10W Without PIR Product Code 5052931515783 £10
Bought several with PIR and seem to work ok, very bright.
From the box 30W version is 2100 lumens, 10W is 700 lumens.
All comments (21)
Mr Mac
3 Jul 162#1
If you want an all weather lamp that will last for years this is only an IP44 you should go for and IP5X. (X standing for any number 1- 7). If you are not familiar with IP code just search IP code ratings.
waby9 to Mr Mac
3 Jul 16#2
?
Soukmadik to Mr Mac
3 Jul 16#4
It depends on where you are positioning it,if it exposed to wind and rain this will probably fail after a few months.
I would buy a Steinel sensor and connect it to the flood light without a sensor. A bit more expensive but you get a guarantee
I've tried the cheaper options from ebay and the have all failed over the winter .
gap30 to Mr Mac
3 Jul 161#8
I own an electrical company I am niceic approved 20 years
This light is fine just buy it they are all the same made in the same Chinese factory
johnstokes1985 to Mr Mac
3 Jul 161#9
Actually Mr Mac, if you wanted weather/waterproof you would want an IPX5 or above
The first number is dust rating, second number is water
That's another excellent find. Don't usually get good deals in Maplin! None in stock anywhere near me though
Mr Mac
3 Jul 16#12
Sorry I got the digits the wrong way around YES IPX5 or above (second digit).
Anyway my point is if you want a lamp to last you need a high IP rating, so anyone reading this will hopefully now know what to look for and have the choice of "do I buy as it is cheap or do I look for a high(er) IP rating" your call now you know there is a standard. Most people would not have know what the IP44 means, in my eyes not good for a heavy winter.
Opening post
30W LED floodlights are usually much more expensive (£30ish).
30W With PIR Product code: 5052931515837 £19 (reduced from £38)
30W Without PIR Product Code 5052931515820 £14
10W Without PIR Product Code 5052931515783 £10
Bought several with PIR and seem to work ok, very bright.
From the box 30W version is 2100 lumens, 10W is 700 lumens.
All comments (21)
I would buy a Steinel sensor and connect it to the flood light without a sensor. A bit more expensive but you get a guarantee
I've tried the cheaper options from ebay and the have all failed over the winter .
This light is fine just buy it they are all the same made in the same Chinese factory
The first number is dust rating, second number is water
https://en.wikipedia.org/wiki/IP_Code
http://www.rainfordsolutions.com/ip-enclosure-ratings-and-standards
This is what I have http://www.electricbase.co.uk/ansell-acaled30pir-30w-carina-1020-1710658
IP65
6=Protected from total dust ingress
5=Protected from low pressure water jets from any direction, limited ingress protection
IPx4=Protected from water spray from any direction, limited ingress protection
http://www.maplin.co.uk/p/30w-led-floodlight-a65kn
Anyway my point is if you want a lamp to last you need a high IP rating, so anyone reading this will hopefully now know what to look for and have the choice of "do I buy as it is cheap or do I look for a high(er) IP rating" your call now you know there is a standard. Most people would not have know what the IP44 means, in my eyes not good for a heavy winter.