Brand: HML
Features: IP-65,Low Power Consumption
Chip Brand: Epistar
Number of LEDs: 300 x SMD-3528 LED
Theoretical Lumens: 6200Lm
Actual Lumens: 5300Lm
CCT/Wavelength: 635-640nm,515-525nm,465-475nm
Light Color: RGB
Connector type: DC Plug
Input Voltage: DC12
Material: FPC
Top comments
powerful_Rogue
30 Mar 167#10
Got 5050 ones from ebay.
Have them in the bedroom (perfect for setting the mood. When the other half seems the room glowing red from the street when she comes round, she knows she's in for a good time!)
Also got a set in the front room.
pitbullmern to powerful_Rogue
30 Mar 166#14
ROOOOXXXXXAAAAANNNNEEEE
you dont have to put on the red light,
Besford to punisheruk
30 Mar 164#20
Why are you asking us?
sambartle_theone to Tweedie
30 Mar 163#27
As others have said yes they can..
to provide a more complete answer.. for RGB ones you'll likely need 4 wires between each segment..
you can cut these with scissors but you have to cut at certain points (usually marked with a dotted line), and then scrape the end of the waterproof silicon off carefully with a knife to get to the copper contacts (that you will have cut in half if following the line), you then solder to each of these and do the same on the other end.. I use this to have lighting above, below and at floor level under each of my kitchen units..
If you use white only LEDs (which is recommended if you dont care about the crazy colours - as the RGB ones are rubbish at making white), then you only need 2 cores between each end.. (cheap 2 core wire works well here - even door bell wire works for short distances)
Its also significantly easier to get the NON-waterproof ones if you plan to do a lot of joins as it saves needing to cut/scrape off the waterproof silicon coating to make the connections.
The soldering is very easy though as the pads you solder too are massive.
If you have any problems doing it message me and ill send you some photos and help out.
Latest comments (44)
punisheruk
1 Apr 16#44
Lol im guessing "like a virgin"? :smiley:
fishmaster
1 Apr 16#43
I can be other Madonna albums, at paid request of course.
covforce
31 Mar 16#42
you are correct, I thought that 30w was combined
pavel76
30 Mar 162#8
Clearly someone is getting paid by gearbest here... and banggood
UncleStan to pavel76
30 Mar 16#33
haha love it:-)
belfastgeoff to pavel76
31 Mar 16#41
hope i get some £
Tweedie
30 Mar 16#18
forgive my ignorance, can these be split into two and joined together by a cable?
ie, was thinking putting it around the kitchen unit but there is a cooker between the units - so can a wire join between two strips (that had been cut from one reel) and still light up?
InTheKnow444 to Tweedie
30 Mar 161#24
I got a 10 metre kit (2 x 5 metres that link together) for underneath my kitchen wall units
Yes, if you are able to solder. Plug in connections may be available too.
sambartle_theone to Tweedie
30 Mar 163#27
As others have said yes they can..
to provide a more complete answer.. for RGB ones you'll likely need 4 wires between each segment..
you can cut these with scissors but you have to cut at certain points (usually marked with a dotted line), and then scrape the end of the waterproof silicon off carefully with a knife to get to the copper contacts (that you will have cut in half if following the line), you then solder to each of these and do the same on the other end.. I use this to have lighting above, below and at floor level under each of my kitchen units..
If you use white only LEDs (which is recommended if you dont care about the crazy colours - as the RGB ones are rubbish at making white), then you only need 2 cores between each end.. (cheap 2 core wire works well here - even door bell wire works for short distances)
Its also significantly easier to get the NON-waterproof ones if you plan to do a lot of joins as it saves needing to cut/scrape off the waterproof silicon coating to make the connections.
The soldering is very easy though as the pads you solder too are massive.
If you have any problems doing it message me and ill send you some photos and help out.
lowcliff to Tweedie
31 Mar 16#40
Yes but you can only cut them where it is marked, I think its about every foot, also you can buy connectors for them and alarm cable can be used to extend them
bseal1947
30 Mar 16#39
6 core alarm wire works well too
canton76a
30 Mar 16#38
shows £7.74 if paying with PayPal.
Milko13
30 Mar 16#37
I think you'll find you need a 5A psu to run "both"
punisheruk
30 Mar 161#36
jesus the question mark was supposed to be a exclamation mark. lighten up what a ****
punisheruk
30 Mar 16#35
wow your a ray of light arent you ?
M1ke_Hunt
30 Mar 161#34
Burty
30 Mar 16#32
Bigfootpete
30 Mar 16#31
I voted hot but then saw that this doesn't include the power adapters - which makes this not so hot.
friiza
30 Mar 16#30
Been looking at this type of thing on Amazon recently. Nearly every product has reviews saying the psu caught fire.
SCOUSEKEVIN
30 Mar 16#29
I do not know much about LED`s but my son does and he bought from http://www.thetreasurehut.co.uk/index.php?main_page=index&cPath=104 he also bought some for both my daughters houses they have them above the kitchen worktops. They work well and have done for over a year now.
lakshyam
30 Mar 16#28
Cheap products but. very bad customer service. don't expect a refund if you get a faulty item from gearbest.
mixtlupus
30 Mar 16#26
Ordered as I already have two that I paid a lot more for and wanted to double the length :smiley:
handeeley
30 Mar 16#23
I work in retail lighting and sell LED strip all day ... this stuff is not good quality! if you do buy it make sure you stick it on metal do not stick on wood/plastic it will over heat and burn out.
fishmaster
30 Mar 162#22
He might not know the answer to his question, yet I wonder how we're supposed to know either. Reminds me of the time when a customer came in to the shop I work at and said I've got a virus it's encrypted all my photos! Get them back please! I said you can't it's crypto locked, it's impossible (unless you know the FBI:) ) So he said WHY wasn't I told about this? I thought hmm there's loads of people I haven't told, so I'm telling you all now in case you come over to me and ask why I never told you about it.
Anyway there's loads of people that write on this forum that are clueless how to use a question mark properly, I'd guess this person is one of them.
powerful_Rogue
30 Mar 167#10
Got 5050 ones from ebay.
Have them in the bedroom (perfect for setting the mood. When the other half seems the room glowing red from the street when she comes round, she knows she's in for a good time!)
Also got a set in the front room.
hcc27 to powerful_Rogue
30 Mar 16#13
Like your style mate.
pitbullmern to powerful_Rogue
30 Mar 166#14
ROOOOXXXXXAAAAANNNNEEEE
you dont have to put on the red light,
DavidEmm to powerful_Rogue
30 Mar 16#16
Do you have a link to the 5050 ones you bought?
Thanks
stephenr to powerful_Rogue
30 Mar 162#21
Restecp
punisheruk
30 Mar 16#15
2 times ive ordered from gearbest and both never turned up
Besford to punisheruk
30 Mar 164#20
Why are you asking us?
fishmaster
30 Mar 16#19
I got some of these last Wednesday, seriously my underpants have never looked so good, I just want to get some carbon filters for them as any one down wind of my pants isn't safe anymore.
powerful_Rogue
30 Mar 161#17
Theres quite a few sellers on Ebay offering the same, however this is the one I ordered from.
Search for item number 281343832989
5M 300 LED 5050 Non-Waterproof / RGB / With adapter & remote - £12.99
Service was excellent. First set I received didnt stick to the wall. Went upsatirs and hour later and they had come off. Emailed the seller and they sent me another pack out FOC. Had the same issue so went to B&Q and purchased some "No More Nails" double sided tape. 6 months later and they are still holding up strong.
freakstyler
30 Mar 16#11
Would also recommend 5050 RGB LED's over these.
Hightowerman to freakstyler
30 Mar 161#12
Any links to recommended suppliers ? cheers
wpj
30 Mar 162#9
Don't bother; absolute rubbish. Half of the LEDs on one strip did not work and the other was cracked so that there was no power beyond that point. Threw them out.
milkonesugar
30 Mar 161#1
can't see a power adaptor with it.can you help/advise ?
covforce to milkonesugar
30 Mar 16#7
you will need at least a 5A 12V DC power supply to run both strips
covforce
30 Mar 161#6
why would you hook up 10m of LEDs to your car ?
you get much brighter LEDS with the 5050 chips and there are tons of kits on ebay cheap with power supplies, you will also find this kit will not display true white it will be more like blue
justonemorepie
30 Mar 16#5
has anyone tried these with a Chinese philips hue compatible zigbee controller?
emribena
30 Mar 16#4
Bought for our caravan ;-)
covforce
30 Mar 16#2
be aware no power supply
belfastgeoff to covforce
30 Mar 16#3
WOW easy to buy 12v DC, hook it up to your car !!!!!!!!!!!
Opening post
Features: IP-65,Low Power Consumption
Chip Brand: Epistar
Number of LEDs: 300 x SMD-3528 LED
Theoretical Lumens: 6200Lm
Actual Lumens: 5300Lm
CCT/Wavelength: 635-640nm,515-525nm,465-475nm
Light Color: RGB
Connector type: DC Plug
Input Voltage: DC12
Material: FPC
Top comments
Have them in the bedroom (perfect for setting the mood. When the other half seems the room glowing red from the street when she comes round, she knows she's in for a good time!)
Also got a set in the front room.
you dont have to put on the red light,
to provide a more complete answer.. for RGB ones you'll likely need 4 wires between each segment..
you can cut these with scissors but you have to cut at certain points (usually marked with a dotted line), and then scrape the end of the waterproof silicon off carefully with a knife to get to the copper contacts (that you will have cut in half if following the line), you then solder to each of these and do the same on the other end.. I use this to have lighting above, below and at floor level under each of my kitchen units..
If you use white only LEDs (which is recommended if you dont care about the crazy colours - as the RGB ones are rubbish at making white), then you only need 2 cores between each end.. (cheap 2 core wire works well here - even door bell wire works for short distances)
Its also significantly easier to get the NON-waterproof ones if you plan to do a lot of joins as it saves needing to cut/scrape off the waterproof silicon coating to make the connections.
The soldering is very easy though as the pads you solder too are massive.
If you have any problems doing it message me and ill send you some photos and help out.
Latest comments (44)
ie, was thinking putting it around the kitchen unit but there is a cooker between the units - so can a wire join between two strips (that had been cut from one reel) and still light up?
something like this
http://www.amazon.co.uk/ALED-Non-waterproof-Lighting-Kitchen-Decoration/dp/B013SNQ658/ref=sr_1_1?ie=UTF8&qid=1459347095&sr=8-1&keywords=10M+Full+5050
to provide a more complete answer.. for RGB ones you'll likely need 4 wires between each segment..
you can cut these with scissors but you have to cut at certain points (usually marked with a dotted line), and then scrape the end of the waterproof silicon off carefully with a knife to get to the copper contacts (that you will have cut in half if following the line), you then solder to each of these and do the same on the other end.. I use this to have lighting above, below and at floor level under each of my kitchen units..
If you use white only LEDs (which is recommended if you dont care about the crazy colours - as the RGB ones are rubbish at making white), then you only need 2 cores between each end.. (cheap 2 core wire works well here - even door bell wire works for short distances)
Its also significantly easier to get the NON-waterproof ones if you plan to do a lot of joins as it saves needing to cut/scrape off the waterproof silicon coating to make the connections.
The soldering is very easy though as the pads you solder too are massive.
If you have any problems doing it message me and ill send you some photos and help out.
Anyway there's loads of people that write on this forum that are clueless how to use a question mark properly, I'd guess this person is one of them.
Have them in the bedroom (perfect for setting the mood. When the other half seems the room glowing red from the street when she comes round, she knows she's in for a good time!)
Also got a set in the front room.
you dont have to put on the red light,
Thanks
Search for item number 281343832989
5M 300 LED 5050 Non-Waterproof / RGB / With adapter & remote - £12.99
Service was excellent. First set I received didnt stick to the wall. Went upsatirs and hour later and they had come off. Emailed the seller and they sent me another pack out FOC. Had the same issue so went to B&Q and purchased some "No More Nails" double sided tape. 6 months later and they are still holding up strong.
you get much brighter LEDS with the 5050 chips and there are tons of kits on ebay cheap with power supplies, you will also find this kit will not display true white it will be more like blue