Found at Tolgate store, Colchester. May be available at other stores. Please check.
Worx WX372.3 SPECS
20V battery power.
Variable speed.
Speed 0-550rpm/0-1800rpm.
Reverse function.
3 to 5 hours charging.
13mm keyless chuck.
2 gears.
24 torque settings.
Maximum torque 50Nm.
Drilling capacity for wood 35mm, steel 13mm and masonry 16mm.
Temperature overload function which shuts down unit automatically if it overheats.
LED power indicator.
Soft grip handle.
Li-Ion battery.
2 batteries.
Carry case
Consider the WX372.5 a small upgrade.
It is the not the new brushless model.
All comments (31)
paulrwarner
1 Jan 161#1
Li-ion are so good for someone who does odd jobs around the house every now and then as the battery holds its charge unlike the Ni-cad. But the battery just dies and needs a long charge usually right in middle of project!
Kulaak to paulrwarner
1 Jan 161#2
Much better than a short life Ni-cad tho' as it's voltage drops almost linearly during use thus the power of the tool is diminishing almost from the off.
Rickardo to paulrwarner
1 Jan 16#4
But there's 2 batteries anyway. Heat, OP, as decent torque too.
chocci to paulrwarner
3 Jan 16#24
yours must be crap then. mine takes 45 minutes to fully charge from near empty. Meanwhile, use the spare.
Lazyoaf
1 Jan 16#3
Great bargain for the home DIY' er
inked
1 Jan 16#5
all stores on counter
Farnham has loads
supacook2k
2 Jan 16#6
will be going to homebase in the morning so I'll advise if any in my local store.
macobrum
2 Jan 16#7
I have this one, a charger stop to work after month or so... :disappointed:
bobo53 to macobrum
3 Jan 16#22
Is yours the 1h one? after what you said I got the suspicion you right, bought 2 and one charger despite the fact I believe it is charging, it is on the flashing green then steady green once charged, the other one correctly displays red then steady green.
Still green flashing today even at room temperature. On the one that I think works correctly, once charged, the green light comes on and stays on even after the battery is taken out (should switch off I think, it does on the other one and any other chargers I got at home of a different make). CAN SOMEONE CONFIRM WHAT IS YOUR EXPERIENCE WITH THE CHARGER, ANYONE ELSE THAT THINGS THEY MIGHT BE FAULTY? Possibly wired both wrongly but how can I trust? I wait until Monday and call the manufacturer and lets see if will be the case to keep at least one or send both back.
I got the 372.5 with the 1h charger and behaves the same with all 4 batteries
deanos
2 Jan 16#8
3 hour charge time is a bit long nowadays, this is all i can find on worx website, 3yr warranty too
I just picked up a 372.5 from Derby Chaddesden store but that was £49 and included a hard case instead of the carry bag. It was actually tucked away behind the newer brushless models, without a shelf label.
There aren't any left in this store or kingsway I'm afraid but worth checking each store because it seems they are selling lots of stock off.
supacook2k
2 Jan 16#10
£49 in culverhouse cross, Cardiff. only 1 left there. none in stock on Newport Road, Cardiff. I saw a list of stores on screen when o got someone to check stock levels and a lot of stores are showing to have 1 or 2 in stock in England and Wales
![Fresh Breakfast Meat Box (Using code) @ Campbells Meat [Haggis / Lorne Sausage / Bacon / Black Pudding & More]](/images/topics/208684_1.jpg)
![[Xbox One] Q. u. b. e: Director's Cut on Deals with Gold](/images/topics/208716_1.jpg)
Opening post
Found at Tolgate store, Colchester. May be available at other stores. Please check.
Worx WX372.3 SPECS
20V battery power.
Variable speed.
Speed 0-550rpm/0-1800rpm.
Reverse function.
3 to 5 hours charging.
13mm keyless chuck.
2 gears.
24 torque settings.
Maximum torque 50Nm.
Drilling capacity for wood 35mm, steel 13mm and masonry 16mm.
Temperature overload function which shuts down unit automatically if it overheats.
LED power indicator.
Soft grip handle.
Li-Ion battery.
2 batteries.
Carry case
Consider the WX372.5 a small upgrade.
It is the not the new brushless model.
All comments (31)
Farnham has loads
Still green flashing today even at room temperature. On the one that I think works correctly, once charged, the green light comes on and stays on even after the battery is taken out (should switch off I think, it does on the other one and any other chargers I got at home of a different make). CAN SOMEONE CONFIRM WHAT IS YOUR EXPERIENCE WITH THE CHARGER, ANYONE ELSE THAT THINGS THEY MIGHT BE FAULTY? Possibly wired both wrongly but how can I trust? I wait until Monday and call the manufacturer and lets see if will be the case to keep at least one or send both back.
I got the 372.5 with the 1h charger and behaves the same with all 4 batteries
https://www.worx.com/en-GB/Worx-20V-Cordless-Hammer-Drill.aspx
There aren't any left in this store or kingsway I'm afraid but worth checking each store because it seems they are selling lots of stock off.