Great offer for two bays of 180cm height x 90cm width x 45cm depth (brilliant as most cheaper shelving is only 30cm deep)
Fast & Free Delivery
Heavy Duty Steel with Powder coated finish in Galvanised Superstrong 4mm MDF Boards (Not Chipboard) 175kgs Per Shelf ( TUV Tested and Rated) Item just snaps together( no bolts required) just use a rubber mallet
VAT invoices available on request
Now with Free Bay Connectors (Connects Bays together)
Whats Included? 2 x Bays of Racking in Galvanised 2 x Bay Connectors
LIMIT of 4 orders per Ebay User ID Any orders over this will be cancelled.
All comments (21)
heedrick
30 Jul 17#1
Tempted by this as I need some for my shed, been looking at
Just want some good quality steel shelving but not too expensive. I've seen where the metal can be twisted and I really want something better than that.
Anyone know the different between the 265kg and the 175kg, is it just the wood?
TheTrainDriver
30 Jul 17#2
That link states that the 265kg model has thicker steel. You get what you pay for with this sort of thing, personally I won't put more than 75kg-ish on a shelf and not on all of the shelves so these will be fine. Having two or more together will help the strength too.
If you try and put 200kg on each shelf then I imagine it might buckle at some point but all depends on what you want to store
Jenn101
30 Jul 17#3
Not bad these, built about 20 up in work and bought 6 for myself, worth having everything you want stored organised for size - then you can build to suit.... Saves a lot of time reworking the ****....
monsavr
30 Jul 17#4
Thanks, good buy. Like the fact the shelves are 45cm rather than the normal 30cm
teerex
30 Jul 17#5
Would like something like this for the shed
jonneyt
30 Jul 171#6
Having very recently bought some racking, I have to say this is a frustratingly good price.
liamwill83 to jonneyt
30 Jul 17#18
Haha, usually happens to me
Gentle_Giant
30 Jul 17#7
Good deal, but personally, I hate many of the snap together designs. I would have to have a closer look before buying. The last snap fit version I bought went back for a refund 6 hours later.
Proveright
30 Jul 17#8
Its a good price but I am not keen on this snap together stuff, as I have it.
I prefer nuts and bolts and if after putting this i up it looks wobbly I would add some nuts and bolts.
bigbak
30 Jul 17#9
Looks the same as the bigdug stuff I bought recently.
They're pretty solid once together with something on them. The mdf would give way long before the snap together bits.
JJBDude
30 Jul 17#10
So is the width for this 90cm total or 180cm total?
TheTrainDriver to JJBDude
30 Jul 17#14
180cm total
ukjoel
30 Jul 17#11
I bought something similar on ebay and it went straight back.
They need to call it racking and not heavy duty racking.
The chipboard that came with mine (4 pieces) were lighter than a single piece of chiipboard used in my other heavy duty racks.
Chuggee
30 Jul 172#12
missmisiowa
30 Jul 17#13
"heavy duty" and "steel" are terms used vaguely with products like that.
i was surprised several times by flimsy tape like "steel" and 250kg shelves which bent and collapsed under 100kg weight...
good luck with cheap "heavy duty" and be careful what you load it with!
freckles101
30 Jul 17#15
Would these be easy to cut down in height? One of our sheds has a fairly low ceiling but fancy the look of these.
Does anyone with any experience of these know if you can build them with the bottom two shelves high enough to get a bike wheel under (at a right angle) as I'd need to get the shelves to fit in a space partially filled with bikes. It would mean the shelves were virtually on stilts for about 18 to 20 inches.
![Fresh Breakfast Meat Box (Using code) @ Campbells Meat [Haggis / Lorne Sausage / Bacon / Black Pudding & More]](/images/topics/208684_1.jpg)
![[Xbox One] Q. u. b. e: Director's Cut on Deals with Gold](/images/topics/208716_1.jpg)
Opening post
Fast & Free Delivery
Heavy Duty Steel with Powder coated finish in Galvanised
Superstrong 4mm MDF Boards (Not Chipboard)
175kgs Per Shelf ( TUV Tested and Rated)
Item just snaps together( no bolts required) just use a rubber mallet
VAT invoices available on request
Now with Free Bay Connectors (Connects Bays together)
Whats Included?
2 x Bays of Racking in Galvanised
2 x Bay Connectors
LIMIT of 4 orders per Ebay User ID
Any orders over this will be cancelled.
All comments (21)
https://www.tufferman.co.uk/product-3-storalex-value-shelving-bays-1800h-900w-450d.html
Just want some good quality steel shelving but not too expensive. I've seen where the metal can be twisted and I really want something better than that.
Anyone know the different between the 265kg and the 175kg, is it just the wood?
If you try and put 200kg on each shelf then I imagine it might buckle at some point but all depends on what you want to store
I prefer nuts and bolts and if after putting this i up it looks wobbly I would add some nuts and bolts.
They're pretty solid once together with something on them. The mdf would give way long before the snap together bits.
They need to call it racking and not heavy duty racking.
The chipboard that came with mine (4 pieces) were lighter than a single piece of chiipboard used in my other heavy duty racks.
i was surprised several times by flimsy tape like "steel" and 250kg shelves which bent and collapsed under 100kg weight...
good luck with cheap "heavy duty" and be careful what you load it with!
http://www.ebay.co.uk/itm/192261621418
and I think its a nice rack :smile:
Many thanks!