Absolute nightmare to construct, even for a professional.

Doesn't matter about the price all the screws leak and the condensation that accumulates in these metal sheds make everything go rusty. Avoid like the plague!

The condensation gets her down a bit, but all in all it's better than a nursing home I keep telling her.

These Yardmaster make are the better quality ones. I've had a 9X7 one for the last 8 yrs. Its in as good cond now as the day i built it and there is absolutely no rust anywhere on the shed or the fixings. They seem flimsy going up, but once they are fully constructed, they are a very sturdy structure. I built mine on a concrete base with DPC and used the ground anchors in 2 corners. This shed aint going anywhere and its been in some storm winds over the last 8 yrs.
Bit of a pig to erect but once done the only maintenance is some grease on the sliding door runners every couple of years.
You do get a bit of condensation on the inside of the wall & roof panels, but it just beads on the inside surface with the odd drip falling and the vents in the shed evaporate this moisture.
I built this shed specifically for my 2 motorcycles and they've suffered no ill effects at all being in there.

I really rate these sheds and when my other shed, a timber one, has to be replaced, i shall replace it with one of these Yardmaster ones.

Mate...3.5 hours...it takes some people 3.5 weeks to do these things! You've done well.

Absolute nightmare to construct, even for a professional.

Thanks. Didn't realise these were so low so I'll give these a miss. Appreciate the reply.

Question to those who have already built one:
Do you think it would be possible to buy two to build one extra long one, losing one end panel from each?
Thanks

Question to those who have already built one:
Do you think it would be possible to buy two to build one extra long one, losing one end panel from each?
Thanks

Have one of these, and they are great. No issue with condensation or leaking. There are a lot of screws though...
The key is you need to build on a raised floor (as the manufacturer advises) don't just plonk it on some old concrete, without a damp proof layer, and then moan when it gets damp inside.

The condensation gets her down a bit, but all in all it's better than a nursing home I keep telling her.

I bought one of these (or very similar) or my mother around 10 years ago, it's still up and has very little signs of rust, yes there is condensation as you'd expect but I laid a concrete base when in hindsight wood may have been better.

I erected it alone in less than a day iirc.

Wait until I've finished, you'll love it!

personally i think they look horrid

I've seen thicker metal on cans of pop! I do own one of those, they are extremely flimsy. You could probably punch a hole through it!! Lasts longer than some wooden ones though. :neutral_face:

Found out last week, someone try to break into my shed through the back of my metal shed because it was quite hidden at the back. Luckily the metal was quite tough. They manage quite few dents and scatches, and couldn't get into it. if it was wood or plastic, they certainly got away with most of my stuffs.
i'm well please that i've chosen metal shed 2 years ago instead of wood or plastic.

Are these easy to move once assembled? I'm looking to put one up on one side of a garden temporarily and then move it to the other side of the garden at a later date.

I think the negative comments are in relation to the Arrow Apex shed that Argos sold cheaply several years ago. I think mine has been up around 6 or 7 years now and all of the white/cream panels have rusted - it's pretty unsightly. I'd happily go for this particular Yardmaster given the comments from those who have this particular model but it would have to be a 10x8 to replace the one I have. I'd stear well clear of the Arrow Apex.

I have got this shed.
Its been up for at least 10 years and no sign of rust or deterioration.
As for condensation... then yes it does suffer a bit in the winter months, but if you have valuable stuff in it then just cover it up with a waterproof tarp
Simples

Tempted more by this one, not on sale but a good size and possibly better suited to my needs.

http://www.argos.co.uk/product/7053249?rec=webRespPDP:6685553:alt:CWVTPUBOOT:7053249

Decisions decisions.

many of the negative comments seem to be coming from folk who have not purchased this particular shed. all the reviews mention issues with construction and a min of 2 ppl to assemble - no such talk about rust, leaks etc.

Doesn't matter about the price all the screws leak and the condensation that accumulates in these metal sheds make everything go rusty. Avoid like the plague!

Ordered the 6x4.5 our current wooden shed is 7x4 and has been leaking for a while.

Does anyone know the width of the door?

and is the lower runner strong enough for a ride on lawn mower?

I have 2 metalsheds built about 5 years ago - both roofs are now quite rusty & are either going to need quite a lot of remedial work or completely replacing if I can find the right size panels (the wall are still fine)

I assume this is down to a big difference in quality to those people saying they havent rusted

I can live with the difficulty of contruction (I did both by myself with just basic DIY skills) & also to some degree the condensation but the rust is a red line for me

Also note that unlike plastic & wood sheds these do not come with a built in base which adds another hassle to the contruction - along with the need to put polystyrene agsint the shed roof to limit the condensation (also adding bathroom sealant round the inside edges of base helps)

personally I would never buy a metal shed again - just too much hassle all round

plastic sheds are by far the best type IMO - zero maintenance usually

Definitely a two man job, for ease of construction.

Mine is still going strong after about 10 years of use. It is sitting on some concrete slabs at the corners, with two pieces of timber placed inside, so there's a flat surface to walk on.

Put mine down in 2003 and it's still standing. No sign of rust or condensation. It's is on some wooden planks that i rested on concrete slabs.

These Yardmaster make are the better quality ones. I've had a 9X7 one for the last 8 yrs. Its in as good cond now as the day i built it and there is absolutely no rust anywhere on the shed or the fixings. They seem flimsy going up, but once they are fully constructed, they are a very sturdy structure. I built mine on a concrete base with DPC and used the ground anchors in 2 corners. This shed aint going anywhere and its been in some storm winds over the last 8 yrs.
Bit of a pig to erect but once done the only maintenance is some grease on the sliding door runners every couple of years.
You do get a bit of condensation on the inside of the wall & roof panels, but it just beads on the inside surface with the odd drip falling and the vents in the shed evaporate this moisture.
I built this shed specifically for my 2 motorcycles and they've suffered no ill effects at all being in there.

I really rate these sheds and when my other shed, a timber one, has to be replaced, i shall replace it with one of these Yardmaster ones.

Its rubbish. Rust appear after few months. Tiny metal and light construction. Must be fit to ground otherwise you can say goodbye on windy wether to that shed

don't forget Quidco 11%

Great price and easy to assemble for anyone with moderate diy skills, if your doing it on your own just make sure it's not windy :smile:

tricky, yes very, 2 cordless drills (screwdrivers) for the hundreds of self tappers and nuts and screwhead bolts and 2 people can put this together in about 4hrs ish :smiley: good price

also, i put mine on a plinth made out of wooden decking to help stop condensation inside (it worked)