States on back and on each bit : Cr-V steel.
Recently had to repair a mobile phone and found the poundland/poundworld precision screwdriver set was just like butter and rounded some of the tiny screws. In fact I went through all three sets of them and they all failed to move the screw and thier tips melted off and iron filings disappeared down into the phone. (one of the poundland tips rounded off)
I checked Halfords, Asda, all over the place for a decent precision set with the all important ph #000 bit but either slightly too expensive (Halfords £11.50 Top quality - screwdriver set not kit), or didn't carry the phillips #000 bit which is essential for opening mobiles etc...
Picked these up in BM Stores next door - An absolute bargain in comparison to what else is out there - had no problem unscrewing same #000 screws that melted the £1 sets. Dunno if real CR-V steel but tips have had no problems whatsoever and not even scratched even with real tough screws. (Tip shown after some tough use on 80 screws)
(Remember to keep the inner plastic cover or the bits go everywhere.)
9 comments
trampjuice
16 May 17#9
top marks for the maplin shoutout.
trampjuice
22 Mar 17#7
It has a whole series of T (star/pentalobe) bits which you need to open the macbook/iphone starting with T4 but likely you need a smaller bit T2, T1 for the iphone.
montana78
22 Mar 17#6
Does this have macbook and iphone screwdriver bits?
murtgurge to montana78
12 May 17#8
doesnt have the bits for the outer shell of macbook but has everything for once you have taken that off
anyway I went to b&m and this set is £4.99, the 38 stubby set is £3.99
Opening post
Recently had to repair a mobile phone and found the poundland/poundworld precision screwdriver set was just like butter and rounded some of the tiny screws. In fact I went through all three sets of them and they all failed to move the screw and thier tips melted off and iron filings disappeared down into the phone.
I checked Halfords, Asda, all over the place for a decent precision set with the all important ph #000 bit but either slightly too expensive (Halfords £11.50 Top quality - screwdriver set not kit), or didn't carry the phillips #000 bit which is essential for opening mobiles etc...
Picked these up in BM Stores next door - An absolute bargain in comparison to what else is out there - had no problem unscrewing same #000 screws that melted the £1 sets. Dunno if real CR-V steel but tips have had no problems whatsoever and not even scratched even with real tough screws. (Tip shown after some tough use on 80 screws)
(Remember to keep the inner plastic cover or the bits go everywhere.)
9 comments
anyway I went to b&m and this set is £4.99, the 38 stubby set is £3.99
plus this set is £1.99 at maplin anyway and has been for over a year
http://www.maplin.co.uk/p/31-piece-precision-screwdriver-set-a90ub?ranMID=40341
You can get a 71-in-1 kit from Amazon which is Cr-V Steel for £16
https://www.amazon.co.uk/Screwdriver-Professional-Precision-Household-Appliances/dp/B01NAQNKGB/ref=sr_1_12?ie=UTF8&qid=1490123491&sr=8-12&keywords=71+in+1
or S2 Steel for £17 here: https://www.amazon.co.uk/InnoGear-Screwdriver-Professional-Electronics-Appliances/dp/B01LYBBEOK/ref=sr_1_1?ie=UTF8&qid=1490123491&sr=8-1&keywords=71+in+1
But frankly the B&M store £3.99 31-in-1 Cr-V kit blows them out the water for the price and quality.