interesting review
https://www.youtube.com/watch?v=sauwoFg3moo

just get the original thread unexpired -- saves disparate info which people may want to read.

link to original thread please, for the technical *cough* discussions

I've got this TV and it is fantastic.

I got the 49" version while it's great value the panel isn't that great. It has a lot of grain especially in dark scenes and older movies. This isn't true for our other 4K TV. Maybe it's the upscaling but even with native 4k content it's quite grainy.

Not really 4k if the viewing is so limited

Using Overwatch on the training range and aiming feels super floaty at 4k so there must be a fair bit of latency at that res. Feels as good as my monitor at 1080p though.

I feel like I've been watching people claim proper HDR support is coming via an update... For years!

The discount code seems to be for TVs over 399 quid.

Retract above, slightly different telly

What the hell are you all talking about?

Purchased. Great deal

Are these 10 bit panels

should I purchase one is the question. I'm looking for a new TV and this appears to be a good deal. so do I take the plunge?

Are we allowed to post information from another forum?

There is an owner who claims to have updated their firmware on one of these tv's which enabled hdr via hdmi. The owner also posted an image showing all ticks in the xbox one s 4k settings page.

Not more detail, the grain effect is not visible on my newer hisense TV which is also 4K. I watched a black and white film on this 49" one and the quality was horrible, the grain was very very noticable. I have noise reduction turned off and even when it's on its rubbish. I'm just informing others of my experience with the TV and I kinda wish I had spent the extra for a better one. But this is still tremendous value

The firmware for HDR over HDMI is now out on the French site for the m3300 model. It works fine on my 43" set. You place the update on a usb stick, fat32 and turn the tv on whilst holding the power button until software update appears. Takes about five minutes to do its thing and works ok with the new Xbox. It's killing my dp to hdmi 2 adapter, 60Hz perhaps because of the lack of bandwidth now 4:4:4 chroma is working.
Firmware Link

How will this be with the new ps4, will it be compatible? Worth picking up for it?

Code is expired now

yea it was that model, people mentioned on there that they are similar. it was enough to convince me an update will be coming so i pulled the trigger and ordered yesterday.

For those interested in using it as PC monitor: no chroma 4:4:4 at 4k 60Hz. 30Hz works fine.

For what it's worth I emailed Hisense regarding the firmware update and they said

"A firmware update for this model is currently being rolled out which we expect to be complete by the end of this month."

Anyone got a mobile app TV remote working?

got the 49inch one for 240 with Amazon warehouse student discount. :innocent:

Acceptable, they said several large scratches on the screen, but when the TV arrived I can barely find even a single scratch. only a tiny one on the bottom of the screen, impossible to notice once powered the TV on.
Very happy of the purchase so far, 240 quid for a 49 inch 4k smart TV, hell yeah!! XD

Amazon warehouse deals, they are doing 20% off for students at the moment. the warehouse price was 306 when I made the purchase, with 20% off I only paid £245. It has full amazon warranty as well, so I'm very happy of what I got so far :smiley:

I just picked up the LG 49" 4K for £269 - absolute steal at that price!

​I suggest looking at the JVC LT-

code has stopped working for Hisense TVs on there at the moment - error stating that it's "specific for one brand"

Just got this tv useing code 4k10, just hope they update HDR via hdmi

Had the 43" version delivered today. Having a bit of a mare with it. It's connected to my PC which I've used with all my previous TVs without issue. The PC is running the Windows version of Kodi. The issue is that when I play back anything that's 720p it's random as to whether it works perfectly or the screen flickers. I can play a video without issue, stop it, play it again and the second time it flickers like mad or just shows a black screen. If I play something 1080p it's fine. If I then go back to the 720p it usually works again, but only the first time. I've tried the HDMI lead in all the ports, but it makes no difference.

Also causing me issues is the Harmony remote. Unfortunately the TV seems to re-order the input list based on most recently used first. This means my activities on the remote aren't working properly as the remote has no idea what order the input list is in and consequently keeps choosing the wrong input.

Works now - no idea what happened before!

​Look at this TV http://www.currys.co.uk/gbuk/tv-and-home-entertainment/televisions/televisions/jvc-lt-43c860-smart-4k-ultra-hd-43-led-tv-10141935-pdt.html#srcid=11026

Well it looks like the 49" LG I purchased the other day is not HDR compatible, meaning I can't make the most out of my Xbox One S. So the question is, will this (after the HDR update) allow me to use the XB1S for HDR gaming? Also, does anyone know if this is HDCP 2.2?

EDIT: Is this a 10-bit panel or 8?

Bought this panel, been using it a few days. I absolutely love it. My only problems with it are 1. The stand is two little legs instead of one down the middle, which means I need to buy a new stand as my current one is too small. 2. It doesn't seem to read my USB 3.0 stick. It reads my 2.0 stick fine. Besides that, for the money it's absolutely incredible.

Code still working, just ordered thanks. Delivery on Wednesday so will give my opinion then. I'm a little dubious with some of the negative comments about but fingers crossed it impresses me for the money

Think you'll be happy mate. I have experienced a few niggles but overall I am ecstatic to have gone from a 32inch 720p tv to this, it looks beautiful.

Just got my TV yesterday. It is amazing, I'm so impressed with the picture quality and ease of use. :-)

Does this come with all the catch up apps installed such as BBC Iplayer, ITV Hub, C4 OD? If not can they be installed?

It's definitely a 10 Bit panel and will support HDR10 after the upcoming Firmware update. Had this confirmed by Hisense Tech Support this afternoon.

Just spoke to Hisense Tech Support this afternoon and they are rolling out the UK Firmware for HDR10 over HDMI between now and the end of the 1st week of Oct. It's being done in batches, so you may get it anytime in this window.

They also recommended against installing the French Firmware, as it will disable any future OAT updates.

That's great news

Do you know if this is for the 49" version as well? So far there isn't a french 49M3000 firmware update yet. The 42" one or the 3300 one doesn't work for me.

​What do you mean by OAT? I already used the French firmware update, what does this mean for me?

Hi, There is a French H49M3000 update and it does work. It was the H49M3000 that I phoned Tech Support about, but the UK update will be rolling out for all models in the 3000 range.

'Over The Air' as in auto-updates, but you'll probably be able to manually flash the UK firmware in the same way, if you're concerned about that.

Watching my 49" panel now. Really happy

I only see the G0422 update on the French site, same as my TV, while the 43M has the G0825. Either way I'm probably just going to wait now :smile:

That's great, I'll just update via USB when the UK firmware is released.

Received my 49" a few days ago, this is definitely worth the money. I have had Sky Q setup and I am able to view UHD content through it, hd content displays perfectly. The only thing I have noticed is what is referred to as 'clouding' during really dark scenes. As of yet its not much of an issue and if someone hadn't mentioned it before i wouldn't know any better.

Links to 43" and 49" Firmware, for those that want to take the plunge early:

http://www.hisense.fr/system/files/telechargements/Mise_a_jour_firmware_43M3000.pdf

http://www.hisense.fr/system/files/telechargements/Mise_a_jour_firmware_49M3000.pdf

The links to the Firmware are found within the PDF's.

That's the current 49M firmware

I downloaded the new firmware update (version G0825) from the Hisense French website and then I placed the new firmware update (version G0825) on an empty FAT32 USB drive, and then I tried to update my UK Hisense H43M3000 TV from version G0422 to the new firmware version G0825, but my TV will not update to the new firmware version. All I get is a message on the screen that tells me the TV is updating, and then after 15 seconds the TV will reboot. When I check the TV's firmware version it still shows the old firmware version G0422.

If anyone here has managed to install the latest French firmware version G0825 on a UK H43M3000 TV, what method did you use?

Sadly my TV is giving problems will only connect to Wi-Fi 2.5GHZ band 5Ghz has disappeared, switching from TV apps to HDMi says"no signal" i have to power off the TV and back on for it to work ,
Hisense says the Wi-Fi module has failed and will send an engineer to fix it sadly a week later nothing ..not impressed with there support
Argos says they are happy to replace it but they no longer stock this TV and offered me the Hitachi 43 " 4K TV , or a refund , i dont know how long they will take to refund the money ( some online say they had to wait 2 months!!!)and they is nothing except the hitachi one in this price range :disappointed:
suggestions for s replacement any one ? or any one else faced similar situation
thanks

I can view BBC HD, ITV HD, and many other freeview HD channels on my Samsung TV (which has a freeview HD tuner built-in), but my Hisense H43M3000 TV does not pick up or show any Freeview HD channels in the channel list, even though I have done a full scan for DTV (Digital TV) channels.

------------
UPDATE
------------

I plugged the TV into a different aerial socket that is in the same room and I am now getting the freeview HD channels.

​I'd like to know the answer to this too, I thought I'd successfully updated by its version G0422, I assume it didn't work for me then.

Hi, ordered the 43M3000 from AO and it arrived yesterday but not sure at this stage whether it was a return that has been resold and don't want to open yet? The top tape seal is broken at each end but it looks like it was taped back over across the top only, and there are 2 straps around the box, is this normal for other AO deliveries of this screen? If anyone can share it would be appreciated as I want to confirm before contacting AO or opening it properly.
Thanks

Mine had 2 straps around it but I didn't notice any apparent re-sealing of the box.

Hi, thanks for the quick reply, much appreciated.

My mistake. I just changed the URL and assumed it was the latest.
I didn't try and use it though. Just waiting for the UK release, any day now.

from hisense regarding the HDR firmware update:

That's great news. Ordered mine from AO and it's coming tomorrow. My Xbox one S came today. I'll let people know what the HDR is like on it when the update rolls out

49 inch is out of stock :disappointed:

*Update: AO suggested checking back on tuesday for info on when more stock will be in.

TV has been going in and out of stock for the last few days. I had it in my basket on Sat, but took too long to checkout and it went out of stock. Then I went back on the website on Sun and it was back! Can still be bought on Amazon, but at the full £380 price tag.

oh cool, thanks

hmm, when its nearly 400 cant help but think 'just chuck in another 100 quid and get the samsung' ie https://www.groupon.co.uk/deals/samsung-ue50ku6000-or-ue55ku6000-uhd-hdr-smart-led-tv

Guess what when i Switched on the TV yesterday morning message appeared saying a software update is ready
something to the effect of this will enable HDR over HDMI and enhancements to you tube, epg info and other minor bug fixes , the HDMI 3 & HDMI 4 now appear as HDMI3_UHD and HDMI4_UHD and you tube displays 4k videos in 4k( you can see the info when you enable video info in the you tube app)

Well you can always get a bigger or better TV, if you're willing to spend the extra cash.

The Hisense TV's are a bargain though, even at full price. I'd say the most bang for your buck.

Wow, that's sooner than expected. Have you got the 43 or the 49?

43" but i did make a complaint to them about them about dragging their heels on a support request and ignoring all communication , maybe that's why?

Have you managed to test anything HDR capable on it?

no RazorRazz
i wouldnt know how to TBH my graphic card is not HDMI 2 capable anyway so iam currently on [email protected] , is there anyway to test something HDR capable in this situation? if i can find anything HDR capable

I guess it would be difficuly to test over HDMI without and XBox One S or UHD Blu-Ray Player.
You can download samples from this website, but that would only test USB HDR playback.
http://demo-uhd3d.com/categorie.php?

​I'd be wary mate, I just tried to update again via the French update and I it's messed my tv up. Currently getting noting but a blank screen.

Ok been messing around all day with the TV and Xbox one s. As it stands without the update you can upscale games to 4K. You can watch 4K videos on YouTube Xbox app. These look better than the ones I get straight off the tv app. Has anyone had similar experience?

However it's not upscaling blu Rays. They play in 1080p. I think the update may fix this but not sure. There is no new firmware available in the update section on the tv

Does the TV automatically upscale? Or is there a setting to enable it ?
Thanks

Funny thing just noticed under picture mode an HDR mode has appeared i of course cant activate this its disabled under all modes including USB? very strange and the you tube app doesn't play in 4k anymore maximum it will play in 2k its played videos in [email protected] yesterday today its either [email protected] or [email protected] very weird broadnband connection well over 100Mbps don't know whats going on

Yeah my connection is over 40 mb and I don't think it was producing 4K on you tube. On the info the resolution said 2000 something. I mean even if it's not 4K all the time it shouldn't be dropping resolution so it looks worse than my 46" blaupunkt 1080p. This is a 43" 4K.

Edit

Just changed a few picture settings and for some reason it's made the picture so much better on the TV YouTube app.

Brightness 54
Contrast 27
Colour saturation 40

Backlights between 20 and 50

Let me know if anyone has any advice for this tv

Mine was definitely displaying YouTube in 4K after the update i specifically remember this Video did display 3840x2160 pretty sure the astra 4k demo on the same channel was the same but cant be sure

Is it still not working then? I can't actually get a read out of the resolution on the YouTube app on the TV, how did you do it?

For those of you who have received the update what version is your tv on now?

I have the 49 inch and still waiting to receive the update prompt. I'm on version V00.01.00A.G0422

I just bought the 49 and I'm still on that version too. Update could be anytime over the next few weeks though. We won't all get it at the same time.

I have the 43" version. I simply can't get my Amazon Fire TV 4k to work in the HDMI ports on the back. It works fine on the side ports. I've tried various HDMI cables, all 4k compliant.

When plugged in the back you see the Amazon logo as it boots up, but then simply a black screen and "no signal" appears on the TV.

when you open the you tube app select setting and activate the show video info check mark app will display the video info when playing still not playing in 4K for me very odd for it to work one day and disappear the next

43" mins on G0825 was on G0390 or something like that i believe earlier

I think when the update drops it'll work. It's the same for my Xbox one s. Because the hdmi port isn't compatible it won't accept 4K 10bit signal. The new firmware, I think, is supposed to make this happen.

I've tried with the French new firmware and unfortunately that hasn't helped. I'm leaning towards a HDCP issue I think.

Just to reiterate what has been said here. no 4:4:4 at 4k @ 60hz for me. Default settings windows rescales all windows,text,apps with 300% dpi and yes everything looks fine then. But back to 100% and chroma is not 4:4:4. Not sure if a new HDMI cable could sort it or not.

Does any one know how to enable th HDR in picture mode please? i have got HDR in picture mode settings but cannot select it for anything , further i have no idea how to enable DLNA for tis TV not showing up my NAS or shared contents

Maybe an obvious question, but you are using HDMI 3 and 4, right? They're the only 2 compatible with HDR.

Yes... at 60hz only getting YBCP
YCbCr420 is all i get on HDMI 3 and 4 an option in the nvidia control panel (under the resolution tab, scroll down).
YCbCr444 is available on HDMI 1 & 2 but only at 30hz. Bit too slow for gaming and really missing the 444 at 60hz... can anyone confirm they see YCbCr444 when at 60hz on 3 and 4 with an Nvidia card?

I have tried an array of cables and a shorter variety reduced 99.9% of noise I was getting at 60hz.

Hi.
I'm still waiting for the update.
My 43" shows as software version: v00.01.00a.G0422

Does the TV automatically upscale? Or is there a setting to enable it ?

Thanks

4K upscaling is automatic but it's a bit of a gimmick. It's impossible to make non-4K content look like true 4K, so don't expect miracles, all it does is change the resolution to 4K but the picture quality stays pretty much the same, you would only notice a difference if you are sitting so close to your TV that you can see the individual pixels :stuck_out_tongue:

Excuse me for stupidity but what does this update do?
Does it provide an app for ITV and 4od?
Allow recording without a usb?

this will enable HDR over HDMI and enhancements to you tube, epg info and other minor bug fixes , the HDMI 3 & HDMI 4 now appear as HDMI3_UHD and HDMI4_UHD and you tube displays 4k videos in 4k

no ITV or 4OD Hisense says there are no plans yet to add these when i contacted them about exactly the same thing
wont allow recording with out a USB as the TV has no inbuilt hard drive/ storage to this effect , i dont know of any TV that does but ofcourse there maybe ones that have this feature ( this is usually the function of set top boxes with storage) out there

Any chance the price goes down to around £320 again? Currently with the code it's £314 but previously the deal was £320ish on the site and then £296 with the code

I had my TV delivered last Friday from AO after ordering on the Sunday before. Just had the update appear on my TV so they are rolling out now. Fingers crossed it does the job.

On Xbox one S I now have all the ticks for TV and HDR. It's activated it as a 10bit panel. Buzzing after the update. Amazing price for this TV spec.

Have you got the 43 or the 49? I've got the 49 and still waiting for the update...

I've got the 43".

Yeah, nothing here yet for the 49 - not that I've got a HDR source to watch :wink:

TV upgraded and only tested YouTube in 4k.
Some videos start showing 4k next to the title, but when loaded revert back to HD.
Whats the best way to check the resolution being used ?

This looked quite sharp: https://www.youtube.com/watch?v=tdwbYGe8pv8

The only way I know is toggle the info in settings on YouTube app.

Hi..
How do you toggle the info in the youtube app ?

Also last night I pressed a key and got a small window with gave me the options to open media, video, images etc.
I've not seen this small window before and I can't get t back again. Any ideas ?

Before you select a video go to settings. Move across to the right until you see show video info. Tick that box and then load a video. That is also accessible from some videos via the more options tab.

just wondered if anyone has had the 49" M3000 firmware update yet?

Not yet, but having asked Hisense, they are currently rolling out the firmware based on serial number, and they expect to complete the process by approximately the end of next week. So hold fast a little bit longer and it should appear, or so it would seem....

Download link for H49M3000:
https://s3-eu-west-1.amazonaws.com/support.hisense.co.uk/Aftersales%20Versions/model%20year%202016/K300/HE49K300UWTS/HE49K300UWTS_pkg_20160920.tar.gz

Instructions:
Download the software to your PC. Open in Win Rar
Copy the upgrade_loader.pkg file to a blank usb pen formatted as FAT32 minimum capacity 2G.
Remove the usb pen when complete.
Make sure that no other usb devices are connected to the set.
Turn the TV on.
Insert the usb pen in to USB1.
Turn the TV off at the main on/off switch underneath the front of the set (in line with the I O symbol to the right of the Hisense name on the bottom trim).
Hold down the standby button on the remote control (while pointing it at the TV).
While holding down the standby button, turn the TV back on at the main switch.
When the screen comes on it will say software updating. Release the standby button.
Wait until the software update finishes (10-15 minutes)
If the software does not install, please try a second or third time.

Got this from Hisense Service Team today.

Do you know if the Hisense H49M3000 update file will work on a Hisense H43M3000?

Has anyone who bought the 49" model experienced really bad backlight bleeding

it will work i have the same TV was sent the same link earlier this week worked for me

I tried to update my Hisense H43M3000 TV with the Hisense H49M3000 TV update file, but my TV will not update. I put the update file (upgrade_loader.pkg) on a empty FAT32 USB stick and followed the instructions provided by Hisense on how to update the TV by USB, but I'm having no luck getting my TV to update.

Have you connected your tv to wifi? I have and I turned it on one day and the update was there ready to download. A week ago. I have the 43"

messaged you the instructions i got

What worked for me was to turn the TV on from standby with the USB in, then as it's turning on quickly press and hold the standby button again.

Yes, my TV is connected to Wi-Fi and I have the option "Auto Firmware Upgrade" turned on. I also did a manual check for the update using both the "Check Firmware Upgrade" and "Check OAD Upgrade" options in the TV's System Update menu, which is giving me the following message: No new update package was detected.

Has anyone got a link to the latest update file that is specifically for the Hisense H43M3000 TV?

I am afraid there is no specefic update file for the 43" model both the m3000 range models have the same update , check your hukd inbox for the instructions i got which i inboxed you i have re applied it via that method it worked for me

I checked my hukd inbox, and it says the following: There are no activities in your Private Messages.

if you don't mind, and if it's not too much trouble for you, can you post the instructions in this thread? Thanks in advance.

There is a reason that i did not post in in this thread in the open , fraid i sent it to the wrong petson my mistake , just inboxed you now do let me know if you get it

I finally got my Hisense H43M3000 TV to update. For some odd reason my TV will not update from my FAT32 Sandisk 3.0 USB stick. I had a dig around my house and found my old Kingston USB 2.0 stick and copied the update file to it. My Hisense H43M3000 TV then updated to the latest firmware G0920.

PS: I received your private message in my hukd inbox. Thanks for taking the time to send me the instructions you had on how to update the TV.

Glad you got it sorted , no problem about the message glad you got it sortef

I posted the instructions further up. It's the official ones from Hisense themselves.

Any ideas why my 43" M3000 has updated the G0825 firmware but my 49" has not?

Thanks all got my tv updated to G0920

HI , Guys i have got an email later in the week after the same link as RazorRazz was sent to me saying the G0920 software is still in testing phase(for the 43 model only- as i have the 43")very odd as i they themselves told me M3000 series has exactly the same hardware i completely overlooked it thinking might have had the same email sent twice, but no email sent on thursday say the "official" software for H43M3000 is still the G0825 i have been instructed install G0825 as this is stable :confused: dont know what to think!! i now have the G0825 running just thought ill let the others know , ill call them on Monday when i get a chance

Ive put firmware G0920 on both my 43" and 49" Hope thats ok LOL

tbh both the interfaces look exactly the same , dont know how it works underneath though may be it didnt pass the official testing period, i dont know really they seem to contradict themselves there a bit saying its exactly the same hardware but not official for the 43"( they didn't exactly say that but only have the 43" so it would seem so) i would only expect the 49" to have a slightly bigger power draw so may be a bigger PSU? dont know unfortunatly have to wait till i call them on monday

I dont see anything different at all apart from the HDR option which is greyed out everything else looks exactly the same

HDR option is available in G0825 as well activated when HDR content is pdetected

Hey guys, need some help here. I've got a Hisense H49M3000 model and when I connect to Xbox One S with the supplied HDMI, it only connects it as full hd 1080p? I went to the settings-> Display & sound -> Video Output and when I try to select 4k UHD on my xbox settings, it tells me my TV doesn't support 4k, I have no idea why?
I've now updated to the latest G920 software, but nothing has changed. Any ideas?
I've got a picture here http://imgur.com/a/TiEDY

Are you connecting your xbox to the HDMI ports at the back of the TV (ports 3 or 4), or the ones to the side (ports 1 and 2)?. Only 3 & 4 support 60hz.

All 4 of mine say 4k @ 60hz, I will try the ones at the back and let you know.

EDIT: I was wrong, I thought it was 60hz on all 4, but the side ones were only 30hz, thank you for the help! Now I just need to buy an angled HDMI cable as I want my TV to be closer to the wall lol

Update process worked fine here :innocent:

Should I be getting 50hz from my two tvs connected to sky q boxes both on hdmi 3?

Yeah, that's the frequency British TV is broadcast in.

Does the update speed up the interface for you? I have the 43" model but still not had the OAD update appear so maybe will try the manual process.

(Side note, strangely my TV turned itself on while I was out (blue led) this evening but would not respond and I had to pull the plug. Seems fine now, but has anybody else seen something similar?)

You need to update your TV's firmware to the latest version and then you will be able to watch 4K YouTube videos in 4K resolution.

My 43 inch Hisense TV would not update to the latest firmware (G0920) if I used a USB 3.0 stick. My Hisense TV only updated to the latest firmware (G0920) when I used a USB 2.0 stick.

As for the grainy image, it could be the source material you are watching. Have you found other HD or UHD content you have watched to also be grainy? Are you using the TV with the default manufactures settings? I found the default manufacturer's settings average at best. I spent a few days fine tuning the picture quality on my Hisense 43 inch TV and now the picture quality looks fantastic. I will post the picture settings I use on my Hisense TV later on this evening in this thread.

As for the 60hz HDMI ports, they are labelled as 60hz on the back of the TV. Once you upgrade your Hisense TV to the latest version (G0920), the 60hz HDMI ports will show up on your TV screen in the "Inputs" section as HDMI3_UHD and HDMI4_UHD.

Also, download the 4K LG HDR demo video titled "LG Colors of Journey - HDR" from the following website: demo-uhd3d.com. You will get a much better indication of the kind of picture quality your Hisense TV is capable of.

The website displayspecifications.com says the Hisense 49M3000 has a native bit depth of 8-bits - which you can see here: http://www.displayspecifications.com/en/model/e0db5fc

And the same website says the 43M3000 has a native bit depth of 8-bits - which you can see here: http://www.displayspecifications.com/en/model/5e5b5fd

Ok, I sent Hisense UK the following e-mail about the panel bit depth on the 43M3000 TV model:

Hi Hisense,

I have a Hisense 43M3000 TV and I would like to know what is the native panel bit depth on the 43M3000? Some people are saying the 43M3000 has a native panel bit depth of 8-bits, and other people are saying that the 43M3000 has a native panel bit depth of 10-bits. Please could you clarify which of these two bit depths the 43M3000 TV supports natively.

This is the reply I received back from Hisense UK:

Thanks for the email and enquiry. I can confirm that this model supports a 10 bit panel.

I hope this helps.

Kind Regards,

Hisense UK

Does anybody have this tv with an Xbox One S and Gears of War?

I've not able to set up the tv on Gears as it's too bright and I can't see the logo's in HDR mode.

Here are the picture settings I use on my Hisense H43M3000 TV:

Standard Picture Mode Settings

Apply Picture Mode = All Sources

Brightness = 48

Contrast = 55

Colour Saturation = 55

Aspect Ratio = 16:9

Backlight = Dynamic Backlight Control: Off and Backlight: 43

Advanced Picture Settings = Tint: 0 Sharpness: 0 Adaptive Contrast: Middle Colour Temperature: Standard Overscan: Off Noise Reduction: Off Colour Tuner: Colour Red settings = Hue: 0 Saturation: 3 Brightness: 0 Colour Green settings = Hue: 0 Saturation: 1 Brightness: 0 Colour Blue settings = Hue: 0 Saturation: 1 Brightness: 0 Colour Yellow settings = Hue: 0 Saturation: 0 Brightness: 0

HDR Picture Mode Settings (must be viewing HDR content on the TV to adjust HDR picture settings)

Apply Picture Mode = Current Source

Brightness = 45

Contrast = 42

Colour Saturation = 42

Aspect Ratio = Automatic

Backlight = Dynamic Backlight Control: Off and Backlight: 97

Advanced Picture Settings = Tint: 0 Sharpness: 2 Adaptive Contrast: Middle Colour Temperature: Standard Overscan: Off Noise Reduction: Off Colour Tuner: Colour Red settings = Hue: 0 Saturation: 0 Brightness: 0 Colour Green settings = Hue: 0 Saturation: 0 Brightness: 0 Colour Blue settings = Hue: 0 Saturation: 0 Brightness: 0 Colour Yellow settings = Hue: 0 Saturation: 0 Brightness: 0

To really see the kind of picture quality these settings deliver, download the 4K LG HDR demo video titled "LG Colors of Journey - HDR" from the following link: http://demo-uhd3d.com/fiche.php?cat=uhd&id=150.

Also download Samsung's SUHD Sensational Picture demo from the following link: http://demo-uhd3d.com/fiche.php?cat=uhd&id=92.

And lastly, I think this 4K video demo titled "LG Demo Garden" (which you can download from the following link: http://demo-uhd3d.com/fiche.php?cat=uhd&id=12), is good for testing the accuracy of colours the above picture settings I posted reproduce. red colours are red, black colours are black, green colours are green, and white colours are white as they should be.

Has anybody had a firmware update on this TV which has totally broken the TV tuner? Mine told me there was an update yesterday (G1207) so I decided to install it. Sadly now half of my channels have disappeared (DTV Freeview) and after doing a full re-tune they are all in the wrong order. I could probably manually sort them, but it will take a while as the interface is now so slow (due to the new EPG).

Is anybody else in the same boat?

Not had this problem as I don't use the tv tuner however after the update my hdmi wasn't recognising a HDR input anymore. You have to go into settings and change the input type on hdmi to advanced or something. Can't quite remember the name but it fixed it