An ok cable.No wonder Sky make so much money.Probably costs them just a few pence per metre!
They should be using something like Webro WF100 for installations.
And that is exactly the instructions I have always used when doing my installs....with added self amalgamation tape
austinc to moneybag
14 Sep 16#26
so these are just twist on..do you not need special crimping tools?
thearbiter65
13 Sep 161#2
Should work with Sky Q too.
lifelong_hatter
13 Sep 16#3
Do some people still have black & white TVs?
genmaxiu
13 Sep 16#4
An awesome price, bought exactly the same set for ~£30 two months ago. Have some heat!
stamfordblue
13 Sep 163#5
An ok cable.No wonder Sky make so much money.Probably costs them just a few pence per metre!
They should be using something like Webro WF100 for installations.
moneybag to stamfordblue
13 Sep 16#9
Why, out of curiosity?
a) I've never used self-amalgamating tape on an F-Type connector and not had a problem with water ingress even on a feed of cheap cable that has been attached to my dish for 17 years.
b) why do you or Sky need "premium" co-ax. Unless you have an extraordinarily long run between the LNB and the box (which Sky don't tend to do unless you push them) what difference does a cable like this and WF100 make with a digital signal used over "average" runs?
the__cat
13 Sep 16#7
You use self-amalg internally?
cicobuff
13 Sep 16#8
Yes, its cheap enough from screwfix and obviously only of real use externally but used internally just to ensure a good snug grip at the base of the f plug as well as ensure even with cutting off the excess trim of ground wire there is none exposed.
the__cat
13 Sep 162#10
I've never really had a problem with a snug grip unless the cable isn't the right grade. When installing the plug, twist the ground loosely andwrap it round the cable towards the top of the remaining outer-sheath, then screw the connector on. You won't get any excess hanging out of the end of the connector.
kristoff
13 Sep 16#11
Also available in white for same price. Voted and bought. Thanks OP.
cicobuff
13 Sep 16#12
I have always just pig tail braided the ground wire, screwed on the f plug and cut off the excess as shown with pliers.
cicobuff
13 Sep 16#13
It is not required for the pull down boots on many a Sky LNB, but boot or no boot I just do, it is cheap and I know for a fact there is not going to be any chance of any water ingress. I actually have two dishes, an 80cm motorised one (single feed no boot) with a linux receiver, as well as a quad Sky LNB Raven MK3 dish for Freesat.
maclennanneil
13 Sep 16#14
Can anyone advise on the best way to get this cable down a narrow tube?
Existing sky cable is a single cable and I want to replace that with a double so I can record two channels.
cicobuff to maclennanneil
13 Sep 16#15
Thinner Shotgun cable WF65 is the same thickness as a standard coaxial, disadvantages are loss over long runs of 10m or more, other disadvantages are due to the lack of thickness you need narrower f plugs....(cheapest place screwfix), and the inner copper wire is thinner making a weaker connection on the back of your receiver.
You might be better off buying a 10m run without the connectors and then feed the cable through, then fit the connectors yourself.
brj080402
13 Sep 16#16
I got a homer done with this for VM and works fine on that too
Youngy
13 Sep 16#17
Taking offers too
NSA
14 Sep 16#18
Thanks for the post. Considering relocating my TV and Sky box in the living room so this will be ideal at the price!
maclennanneil
14 Sep 161#19
Thanks Buddy.
kester76
14 Sep 16#20
Always dubious when a cable core isn't listed, are these CCA cables ?
sjms01 to kester76
14 Sep 161#24
Good point and yes it is economy CCA cable.
maclennanneil
14 Sep 16#22
Thanks
godzillafan
14 Sep 16#23
wf100 good stuff, I used that to replace the old sky cables, when I put my own freesat dish up.
javey93
14 Sep 16#25
£6.68 Buy it now
veedubjai to javey93
14 Sep 161#27
£6.86 BIN. The Power of HUKD.:neutral_face:
moneybag
14 Sep 16#28
yep, the interior thread of the metal F-Type connector grips the rubber outer and holds it in place just by screwing on.
FTOdude170
14 Sep 16#29
can this not be used similarly for Virgin media cables too?
kester76 to FTOdude170
14 Sep 16#31
I wouldn't bother to be honest. Pay a little extra for a solid copper core, CCA cables are pretty low grade and it's not a massive price difference between them.
Opening post
Sky+ receivers
Sky+ HD receivers
other satellite receivers with two satellite dish inputs
No need for a technician visit, just connect this cable to the end of your existing lead using the
supplied coupler and the other end to your equipment - job done!
No loss in signal - this is the thicker cable that some Sky engineers commonly use
Top comments
courtesy of http://www.stevelarkins.freeuk.com
They should be using something like Webro WF100 for installations.
All comments (31)
courtesy of http://www.stevelarkins.freeuk.com
They should be using something like Webro WF100 for installations.
a) I've never used self-amalgamating tape on an F-Type connector and not had a problem with water ingress even on a feed of cheap cable that has been attached to my dish for 17 years.
b) why do you or Sky need "premium" co-ax. Unless you have an extraordinarily long run between the LNB and the box (which Sky don't tend to do unless you push them) what difference does a cable like this and WF100 make with a digital signal used over "average" runs?
Existing sky cable is a single cable and I want to replace that with a double so I can record two channels.
Link to [thinner F Plugs] for WF65 cable.