The Stanley 34 Piece Screwdriver Set is a set of regular and instrument screwdrivers made with anti-slip, bi- material handles. With an assortment of 20 x 25mm bits and including a handy storage/carry case for your tools you can feel rest assured your tools are safe and secure!
Stanley 34 Piece Screwdriver Set Extra Info
Anti-slip Bi-material handlesStorage case includedMagnetic bit holder
What's in the box
1 x Magnetic bit holder3 x slotted screwdrivers: 3x75, 5x75, 6x1003 x Philips screwdrivers: PH0x75, PH1x75, PH2x1002 x Torx screwdrivers: T15x100, T20x1003 x Precision slotted screwdrivers: 2x50, 2.5x50, 3x502 x Precision Philips screwdrivers: PH00x50, PH0x504 x Slotted bits: 3mm, 4mm, 5mm, 6mm3 x Philips bits: PH1, PH2, PH34 x Pozidrive bits: PZ0, PZ1, PZ2, PZ35 x Torx bits: T10, T15, T20, T25, T304 x Hex bits: 3mm, 4mm, 5mm & 6mm1 x Carrying case
Top comments
othen to Jetpac
4 Apr 166#5
You are entitled to your opinion of course, but I must say that in this case it is a rather absurd one. I use a similar set of Stanley screwdrivers almost daily, they are absolutely fine for normal use (if I was a carpenter or a mechanic by profession I might buy something better - but then maybe not) and £9 is a very good price indeed.
I've added some heat as this is a really good deal, I may even buy a set today.
Jetpac
4 Apr 166#27
Nope using correctly. The steel is just poor.
I don't know why ive had to justify myself so in this thread.
I've stated.. Bought these and they weren't great.
Just because the tools are £9 does not necessarily make them a good buy.
Take my advice, don't take my advice.
If given the chance i wouldn't have bought but instead would have gone for the halfords set as suggested above.
Caveat emptor.
sniperpenguin
4 Apr 164#23
I would rather grab the Halfords Pro set when it comes up on offer (which it does, often) for a similar price. Link Here
Better warranty, decent screwdrivers -Only downside is the lack of a plastic case.
stone3t
4 Apr 163#33
I have a set of these, and I can confirm the steel used in these drivers is softer than average. £9 is cheap, nice if you don't have sufficient drivers in your home. But if do have sufficient drivers in your tool box like I do, don't buy these and thinking it's good to have some spares - they don't last and you ended up with need to buy another set again soon. My advise: if you do a lot of DIY like I do, get yourself a set of finest tools from the very beginning. At the end of the day, you get what you pay.
Latest comments (43)
andyb83
4 Apr 16#26
I'd suggest if the heads deform then you aren't using them correctly. ie. the wrong screwdriver for the type of screw you are using/extracting.
davek to andyb83
5 Apr 16#40
I'd suggest you haven't got a clue what you are on about.
Going off your "if the screwdriver fits the type of screw perfectly then it shouldn't deform" theory, then I should be ok with these chocolate screwdrivers I made earlier?
Just because it fits doesn't mean it's not going to shear or bend. You can get a perfect fit but if the screw is tight and the steel of poor quality then you're not getting the screw out simple as that.
Go buy a set, walk into your local timber yard and ask a professional tradesman what he thinks of them. Post their cleaned up replies on here.
davek to andyb83
6 Apr 16#42
I'd suggest you haven't got a clue what you are on about.
Going off your "if the screwdriver fits the type of screw perfectly then it shouldn't deform" theory, then I should be ok with these chocolate screwdrivers I made earlier?
Just because it fits doesn't mean it's not going to shear or bend. You can get a perfect fit but if the screw is tight and the steel of poor quality then you're not getting the screw out simple as that.
Go buy a set, walk into your local timber yard and ask a professional tradesman what he thinks of them. Post their cleaned up replies on here.
davek to andyb83
6 Apr 16#43
I'd suggest you haven't got a clue what you are on about.
Going off your "if the screwdriver fits the type of screw perfectly then it shouldn't deform" theory, then I should be ok with these chocolate screwdrivers I made earlier?
Just because it fits doesn't mean it's not going to shear or bend. You can get a perfect fit but if the screw is tight and the steel of poor quality then you're not getting the screw out simple as that.
Go buy a set, walk into your local timber yard and ask a professional tradesman what he thinks of them. Post their cleaned up replies on here.
smartypant
5 Apr 16#41
Cheap built, bought this few months back. All screwdriver is bend or broken now.
But hot for price
rlearmouth
5 Apr 16#39
Halfords are currently doing selected Pro screwdriver sets at £15 each and 2 for £20. Buying 2 of these sets would probably cover most requirements and they are guaranteed a lifetime. There might be 34 items in the Stanley set but they wouldn't all get used
smugjojo
5 Apr 16#38
Pro sets came up ages ago - worked out at £3.60p a set instead of £15. Posted on this site.
Good god no, i have had various tools by rolson all of which have broken or fallen to pieces.
stealth666
4 Apr 16#34
Mine too.... though I was trying to get out bigger screws and was too lazy to go get the proper size :smiley:
Ordered by the way :smiley:
stone3t
4 Apr 163#33
I have a set of these, and I can confirm the steel used in these drivers is softer than average. £9 is cheap, nice if you don't have sufficient drivers in your home. But if do have sufficient drivers in your tool box like I do, don't buy these and thinking it's good to have some spares - they don't last and you ended up with need to buy another set again soon. My advise: if you do a lot of DIY like I do, get yourself a set of finest tools from the very beginning. At the end of the day, you get what you pay.
careden
4 Apr 16#32
nice find
jamgin
4 Apr 161#31
Are these left handed or right handed screwdrivers?
3.1415926
4 Apr 16#30
Or Tata (tat ?)
Infiltrator
4 Apr 16#29
And if you'd rather have a blue and yellow set search for 'kinzu' on eBay and Amazon. Maybe the Chinese chap that makes these is called Stanley?
Infiltrator
4 Apr 16#28
Voted cold on the basis that the only person who has any real experience of tyres has clearly stated that they're rubbish quality.
As said in an earlier post, wait till halfords reduce their professional set again - they're genuine quality at a very good price.
Jetpac
4 Apr 166#27
Nope using correctly. The steel is just poor.
I don't know why ive had to justify myself so in this thread.
I've stated.. Bought these and they weren't great.
Just because the tools are £9 does not necessarily make them a good buy.
Take my advice, don't take my advice.
If given the chance i wouldn't have bought but instead would have gone for the halfords set as suggested above.
Caveat emptor.
Jetpac
3 Apr 162#3
Not worth it... Bought the same set a few years back.... The steel the screwdrivers is made of is cheap and crappy.
othen to Jetpac
4 Apr 166#5
You are entitled to your opinion of course, but I must say that in this case it is a rather absurd one. I use a similar set of Stanley screwdrivers almost daily, they are absolutely fine for normal use (if I was a carpenter or a mechanic by profession I might buy something better - but then maybe not) and £9 is a very good price indeed.
I've added some heat as this is a really good deal, I may even buy a set today.
bargainbuyer29 to Jetpac
4 Apr 161#25
Must be Chinese steel.
kamenitzabrit
4 Apr 161#24
I've never used these exact items, but can honestly say that Stanley is not the guarantee of quality it used to be over 20 years ago. I can well believe that the blades deform easily - they used to make a ratchet screwdriver with interchangeable bits which was amazing value at around 7 quid about ten years ago, but since then some of their stuff is on a par with pound shop items.
I had many friends who were in the furniture trade and so used screwdrivers, chisels, planes etc several times a day - at one time Stanley tools would last most of a lifetime, but for some reason they became shoddy, perhaps a change of ownership, or pressure from places like Halfords B&Q etc to reduce prices - whatever the reason, I'd much rather go to a good car boot or house auction and buy some genuinely old tools from a time when they were Sheffield or German made.
sniperpenguin
4 Apr 164#23
I would rather grab the Halfords Pro set when it comes up on offer (which it does, often) for a similar price. Link Here
Better warranty, decent screwdrivers -Only downside is the lack of a plastic case.
Sid666
4 Apr 16#22
been Halfords & these show £10 on basket but scan at £9. good find just got my set home Thanx OP
Chris-C
4 Apr 16#21
He was meaning it's not just an opinion because it is fact. There can be a big difference.
These will be fine for most jobs but the smaller headed Stanley tools I've had have all deformed quite easily.
othen
4 Apr 16#20
If it is not an opinion why did you say it?
burgyuk
4 Apr 16#19
Great price and find OP, Heat :smiley:
holmesyhukd
4 Apr 16#18
good find OP, heat added
deoksykortykosteron
4 Apr 16#16
Good find!
Jetpac
4 Apr 162#15
it's not really an opinion.. the heads deformed especially of the smaller drivers.
trackdayking
4 Apr 161#14
been screwed before :disappointed:
stevenprior1
4 Apr 16#13
just ordered a set i had these last year and used them alot so i dond mind paying £9 a year for a set like this.
groomy2004
4 Apr 16#12
Reserved a set and picking them up in the next hour Many thanks OP for posting this deal.
hukdbargain
4 Apr 161#11
Soon to be a second time buyer if you buy these.
frank_rocco
4 Apr 16#10
Perfect for the first time buyer :smiley: thanks OP, reserved.
louthepoo
4 Apr 16#9
Good price for the quantity but you'll soon know which ones you use regularly as you'll have to replace them soon enough, I think they're made of butter. Heat for the price though
sradmad
4 Apr 161#8
good find op, heat added
Huraqan
4 Apr 16#7
Good find, reserved one. Thanks OP
smugjojo
4 Apr 161#6
if I was a carpenter.......................................[/quote]I feel a song coming on :wink:[/quote]#
and you were a lady.......me co writer - Can I be Lennon in this partnership?
![Fresh Breakfast Meat Box (Using code) @ Campbells Meat [Haggis / Lorne Sausage / Bacon / Black Pudding & More]](/images/topics/208684_1.jpg)
![[Xbox One] Q. u. b. e: Director's Cut on Deals with Gold](/images/topics/208716_1.jpg)
Opening post
The Stanley 34 Piece Screwdriver Set is a set of regular and instrument screwdrivers made with anti-slip, bi- material handles. With an assortment of 20 x 25mm bits and including a handy storage/carry case for your tools you can feel rest assured your tools are safe and secure!
Stanley 34 Piece Screwdriver Set Extra Info
Anti-slip Bi-material handlesStorage case includedMagnetic bit holder
What's in the box
1 x Magnetic bit holder3 x slotted screwdrivers: 3x75, 5x75, 6x1003 x Philips screwdrivers: PH0x75, PH1x75, PH2x1002 x Torx screwdrivers: T15x100, T20x1003 x Precision slotted screwdrivers: 2x50, 2.5x50, 3x502 x Precision Philips screwdrivers: PH00x50, PH0x504 x Slotted bits: 3mm, 4mm, 5mm, 6mm3 x Philips bits: PH1, PH2, PH34 x Pozidrive bits: PZ0, PZ1, PZ2, PZ35 x Torx bits: T10, T15, T20, T25, T304 x Hex bits: 3mm, 4mm, 5mm & 6mm1 x Carrying case
Top comments
I've added some heat as this is a really good deal, I may even buy a set today.
I don't know why ive had to justify myself so in this thread.
I've stated.. Bought these and they weren't great.
Just because the tools are £9 does not necessarily make them a good buy.
Take my advice, don't take my advice.
If given the chance i wouldn't have bought but instead would have gone for the halfords set as suggested above.
Caveat emptor.
Link Here
Better warranty, decent screwdrivers -Only downside is the lack of a plastic case.
Latest comments (43)
Going off your "if the screwdriver fits the type of screw perfectly then it shouldn't deform" theory, then I should be ok with these chocolate screwdrivers I made earlier?
Just because it fits doesn't mean it's not going to shear or bend. You can get a perfect fit but if the screw is tight and the steel of poor quality then you're not getting the screw out simple as that.
Go buy a set, walk into your local timber yard and ask a professional tradesman what he thinks of them. Post their cleaned up replies on here.
Going off your "if the screwdriver fits the type of screw perfectly then it shouldn't deform" theory, then I should be ok with these chocolate screwdrivers I made earlier?
Just because it fits doesn't mean it's not going to shear or bend. You can get a perfect fit but if the screw is tight and the steel of poor quality then you're not getting the screw out simple as that.
Go buy a set, walk into your local timber yard and ask a professional tradesman what he thinks of them. Post their cleaned up replies on here.
Going off your "if the screwdriver fits the type of screw perfectly then it shouldn't deform" theory, then I should be ok with these chocolate screwdrivers I made earlier?
Just because it fits doesn't mean it's not going to shear or bend. You can get a perfect fit but if the screw is tight and the steel of poor quality then you're not getting the screw out simple as that.
Go buy a set, walk into your local timber yard and ask a professional tradesman what he thinks of them. Post their cleaned up replies on here.
But hot for price
Ordered by the way :smiley:
As said in an earlier post, wait till halfords reduce their professional set again - they're genuine quality at a very good price.
I don't know why ive had to justify myself so in this thread.
I've stated.. Bought these and they weren't great.
Just because the tools are £9 does not necessarily make them a good buy.
Take my advice, don't take my advice.
If given the chance i wouldn't have bought but instead would have gone for the halfords set as suggested above.
Caveat emptor.
I've added some heat as this is a really good deal, I may even buy a set today.
I had many friends who were in the furniture trade and so used screwdrivers, chisels, planes etc several times a day - at one time Stanley tools would last most of a lifetime, but for some reason they became shoddy, perhaps a change of ownership, or pressure from places like Halfords B&Q etc to reduce prices - whatever the reason, I'd much rather go to a good car boot or house auction and buy some genuinely old tools from a time when they were Sheffield or German made.
Link Here
Better warranty, decent screwdrivers -Only downside is the lack of a plastic case.
These will be fine for most jobs but the smaller headed Stanley tools I've had have all deformed quite easily.
and you were a lady.......me co writer - Can I be Lennon in this partnership?