Long life tungsten carbide-tipped circular saw blades for ripping, cross, fine and clean cuts in wood. Reduction rings available for different bore sizes.
Ripping Cut
Cutting Width (Kerf): 1.7mm
Tungsten Carbide-Tipped
Rake Angle: 15°
Anti-Kickback
Specifications:
Diameter 150mm. Number of teeth 16. Cutting bore 10 or 12.75 or 20mm.
15 comments
iDealYou
6 Dec 15#1
Does this work with all brands of circular saw?
derek145 to iDealYou
6 Dec 15#2
It will but you need to make sure the saw blade diameter is suitable.
morrig
6 Dec 15#3
If your saw uses 150mm blade and has a bore diameter of 20mm then yes if yours is smallerbore, as there seems to be two washers(rings) of 10mm and 12.75mm fit smaller bores.
iDealYou
6 Dec 15#4
Mine is 185mm with 20mm bore.
So I guess the bore size is the most important aspect?
Thanks.
grandads50 to iDealYou
6 Dec 15#8
The bore size is important as it won't fit your saw if its different,,, but the diameter is also important, too big and it wont fit you saw,,, too small and it wont cut to the correct depths,, a 150 mm diameter blade for a 185 mm saw is useless
twinkle
6 Dec 15#5
Nothing near me
Kickassonxbox
6 Dec 15#6
No stock near here either.
IndyS
6 Dec 15#7
OOS near me as well now so set to expired :disappointed:
Ronan91
6 Dec 15#9
Great stocking filler. Heat added.
fudgenuts2
7 Dec 15#10
oooh! Frisbees!
bobo53
7 Dec 15#11
But in case of an emergency and a non deep cut can still make the job (bore permitting), correct?? Cut will be reduced from 60mm to over 40mm at worse. Motor will also rotate faster making a cleaner cut with any smaller blade.
dibbo
7 Dec 15#12
This blade snags quite often. It's the only brand of blade I've ever had a problem with and is potentially dangerous. Presume this is why they've discounted it...
![Fresh Breakfast Meat Box (Using code) @ Campbells Meat [Haggis / Lorne Sausage / Bacon / Black Pudding & More]](/images/topics/208684_1.jpg)
![[Xbox One] Q. u. b. e: Director's Cut on Deals with Gold](/images/topics/208716_1.jpg)
Opening post
Ripping Cut
Cutting Width (Kerf): 1.7mm
Tungsten Carbide-Tipped
Rake Angle: 15°
Anti-Kickback
Specifications:
Diameter 150mm. Number of teeth 16. Cutting bore 10 or 12.75 or 20mm.
15 comments
So I guess the bore size is the most important aspect?
Thanks.